Is slow PC performance keeping you from working? Before spending thousands of dollars on a new machine, try this. You just need to learn how to install RAM to boost your PC’s speed and processing power.

What is RAM

RAM is the abbreviation for random access memory. It is a PC’s short-term storage bank, different from the long-term memory space found on the hard drive. RAM is a really quick and temporary form of storage that grasps data that is being processed right now and will be required soon.

How To Install RAM

There is no hard and fast rule to install RAM; it is quite an easy process to follow. Make sure to be very attentive and delicate while working with the PC’s internal hardware so you don’t damage anything sensitive.

Here is an installation guide for you to install RAM in two ways: one way for desktops and the other for laptops.

1. How To Install RAM On A Laptop

To upgrade old or install RAM in your laptop, find the RAM area inside the computer and fit the new module RAM into the slot. Then, put slight pressure on the cartridge in a downward motion until a click is heard. This click will signal that the cartridge is fixed and locked in the RAM clips.

In some laptops, their RAM modules are closely joined with the motherboard, so ensure to see if you can perform the installation and then proceed; otherwise, we will suggest you keep the internal settings the same. If the machine has separable modules, here is how to install RAM on laptops:

• Shut down your laptop and the lid as well. Let it rest for a while until it cools down completely.
• Meanwhile, unplug all the cables, cord, or any wires attached to the laptop.
• Place it upside-down on a flat but hard surface.
• You need to unscrew to remove the casing at the bottom, or you need to open the section surrounding your RAM. It totally depends on the model you have.
• To avoid static discharge and protect delicate internal parts, ground yourself by touching an unpainted metal surface.
• Separate your current modules by slightly moving the clips that hold them tight. The module itself will pop out a little bit. Remove it from the slot by pulling it out completely.
• Avoid touching the golden connectors at the top of the module. Fit the new RAM into place. Then, firmly press it downwards and wait for it to lock inside the slot.
• Once this is done, resecure the RAM access panel or the bottom casing of the laptop. Put your laptop right side up now and let it rest for a few minutes before connecting all the cables back.

2. How to Install RAM on A Desktop Computer

Now, let’s see how to install RAM on a desktop PC and speed up your computer. Here are the steps for it:

• We will begin by shutting down the PC and unplugging all the wires, cords, and cables.
• Lay down the CPU on a flat and smooth surface on its side.
• Open the CPU casing so that you can get access to the motherboard.
• Again, to avoid static discharge and protect delicate internal parts, ground yourself by creating contact with an unpainted metal surface.
• Remove RAM modules by putting pressure on either side clip. When they pop up, pull them out completely.
• Only hold the edges of the RAM module and prevent touching the gold connectors.
• Install the new RAM in the slot, firmly press it downwards, and wait for the clips to snap. They are now set and locked inside the slot.
• Rearrange the CPU, put the casing back, and plug all the cords back in place.

Check That Your Installation Worked

When you are done installing in either of the devices, you need to be sure if the installation worked or not. You can check it by following steps:

• Launch Control Panel
• Go to System and Security
• Then select System to show your device settings.

If the RAM amount matches with the memory mentioned in the control panel, your installation was successful.

How Much RAM Can Your Motherboard Handle?

Every PC has a limited capacity of the RAM, it can use. So meanwhile you are installing RAM, double check the capacity of your PC with the RAM you want to install. Here is how you can check the motherboard compatibility.

• Press and hold the Windows key + R, and a Run window will appear.
• Write msinfo32 in the widow and press OK. A System Information summary display will appear.

• Locate the info on the motherboard under BaseBoard Manufacturer, BaseBoard Product, and BaseBoard Version.

• With the help of this, you can search for the motherboard’s specifications to find the RAM capacity.

How to check your current RAM

On Windows, you can check your current RAM through Task Manager in a few steps:

• Launch Task Manager with hitting Ctrl + Shift + Esc together or just write it in the search bar.

• Then tap on the Performance option to look for the Memory and check your RAM installation ad well as usage information.

• The Task Manager reflects the total RAM capacity, how much memory the PC is using, how much is left, and other details.

FAQs

Q: How much RAM does your PC need?
Ans: For overall good performance, and multitasking, your PC will need 8 GB at least.

Q: Is it OK to buy RAM secondhand?
Ans: Yes, they are perfectly fine to use if they have a warranty and work well. They don’t easily go bad until many years later.

Conclusion

Now you know everything about how to install RAM, so your computer will no longer operate slowly or lazily.